卷帘门遥控器失灵可以接纳下面要领：

　　The following methods can be taken if the remote control of the rolling shutter door fails:

　　步：拆卸下遥控器的外壳，将遥控器的电池取出来，然后卸下遥控器的螺丝，将遥控器的外壳拆卸下来，留下外壳、电路板、导电橡胶3部分。

　　Step 1: Disassemble the casing of the remote control, remove the battery from the remote control, and then remove the screws from the remote control. Remove the casing of the remote control, leaving behind three parts: the casing, circuit board, and conductive rubber.

　　第二步：整理遥控器电路板。将遥控器的电路板用吹风机的凉风吹去灰尘，然后用2B橡皮擦拭一下每个电路板，提高它的导电敏感度。

　　Step 2: Clean the remote control circuit board. Blow the dust off the circuit board of the remote control with cold air from a hair dryer, and then wipe each circuit board with a 2B eraser to increase its conductivity sensitivity.

　　第三步：整理遥控器导电橡胶。将遥控器的导电橡胶用棉球蘸取酒精擦拭，擦拭掉上面的灰尘和污垢。然后用手指蘸取2B铅笔的石墨粉，或者爽性用2B铅笔在每个按键上举行涂抹，直到涂抹所有常用的按键。第四步：把遥控器组装回去，安上电池，就不会失灵了。

　　Step 3: Clean the conductive rubber of the remote control. Wipe the conductive rubber of the remote control with a cotton ball dipped in alcohol to remove any dust and dirt. Then dip your fingers into the graphite powder of the 2B pencil, or simply apply it to each button with the 2B pencil until all commonly used buttons are covered. Step 4: Assemble the remote control and install the battery to prevent it from malfunctioning.

本文由济南卷帘门友情贡献.更多有关的知识请点击:/真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向各人贡献.敬请期待.